ENVIRONMENTAL FRIENDLY & NOISELESS GENERATORS
TROPICAL S.A. presents its all new TB Series hydrogen fuel cell power systems, with nominal electric power ranging from 300W to 3kW using the Proton Exchange Membrane (PEM) technology. The membrane on the fuel cell stack is converting hydrogen into electric power and the only “pollutant” is clean water. These power generators produce stabilized 12V, 24V or 48V DC (using a high quality dc/dc converter) or 12V, 24V or 48V DC as battery charger s and moreover, an inverter can be used to produce 110V or 230V AC. Mostly designed to be used as battery charger, Uninterruptable Power System (UPS), back-up power system, stand alone power generator providing electricity to our homes, solar hybrid solution, several military applications and for remote applications. Its main advantages are: quite in operation, small in size & light weight, produces zero-emissions, minimal maintenance, reliable, stable & quick start operation.
USER FRIENDLY INTERFACE FOR EASY OPERATION & DATA ACQUISITION
All TB - Series hydrogen fuel cell power systems are being controlled by an intelligent controller which is operated by a 16-colored touch screen monitor. The management of these systems is easily done through the touch screen monitor and is fully automated. Moreover, data acquisition of the parameters can be saved on an excel file (using a SD memory card or your memory stick directly).
MEASUREMENTS APPEAR ON THE SCREEN
Stack Power (Watt)
Stack Voltage (Volt)
Stack Current (Ampere)
Battery Voltage (Volts)
Converter / Charger Voltage (Volts)
Converter / Charger Current (Ampere)
Hydrogen Leak Sensor
Hydrogen Pressure Sensor (Bar)
Hydrogen Inlet Valve (on/off)
Hydrogen Purge Valve (on/off)
Air Stack Temperature (°c )
Fan Air Flow Rate ( % )
Systems Total Operating Time
Hydrogen Consumption (lt/hr)
Time / Date
System Service Time
TECHNICAL SPECIFICATIONS
FUEL CELL SYSTEM CODE : TB Series
TYPE : PEM (Proton Exchange Membrane)
POWER OUTPUT : 300W to 3kW
DC OUTPUT (DC Inverter) : 12V, 24V or 48V/DC
DC OUTPUT (Battery Charger) : 12V, 24V or 48V/DC
AC OUTPUT (Inverter) : 110 or 230 V/AC
HYDROGEN PURITY : 99.95%
OXIDANT : Ambient Air
COOLING SYSTEM : Air
WEIGHT : 15kg (300Watt) to 50Kg (3kW)
DIMENSIONS (mm) : L:450 x W:250 x H:450 to750
MAIN APPLICATIONS
Battery Charger for laptops, i-pod, mobile phones, PDA’s, etc
Military applications, Robotics, Automation, Modeling, Emergency power, etc
Mobile applications with alternating points of use as Outdoor events, Mobile Traffic Signals, Solar/air/fuel cells hybrid systems
Signal gathering and transmission, environmental data logging, security appliances & cameras, building observation, etc
Stationary appliances in remote regions / Remote applications
Recreational Vehicles, Caravans, Motor Yachts & Boats, etc
Emergency UPS power / back-up power for Telecommunication, Shops, Buildings, etc
Seismographs & Meteo Stations, Security, Oil, Gas, etc
Demonstration & Research projects
No comments:
Post a Comment